Télécharger Imprimer la page

3M Peltor WS ProTac XPI MT15H7 WS6 Serie Mode D'emploi page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
EN
3M™ PELTOR™ FR09 Battery charger
Charger for the PELTOR ACK053.
3M™ PELTOR™ FR08 Power supply
Power supply for the PELTOR FR09.
3M™ PELTOR™ M171/2 Wind shield for MT73 speech
microphone
Effective protection from wind noise. Enhances the life span
and protects the speech microphone. One per package.
3M™ PELTOR™ 1180 SV Battery lid
Battery lid for use with 1.5 V batteries of type LR6 (AA).
3M™ PELTOR™ M60/2 Wind shield for ambient
microphones
Wind protection for the microphones.
3M™ PELTOR™ FLX2 Accessory cables
Please contact your 3M PELTOR dealer.
FCC AND IC INFORMATION
This device complies with Part 15 of the FCC rules and Industry
Canada's license-exempt Radio Standards Specifications.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesirable operation.
This portable device with its antenna complies with FCC/IC RF
Exposure limits for general population / uncontrolled exposure.
The antenna used for this device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Changes or modifications to the equipment not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residental
installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
device does cause harmful interference, which can be
determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation distance between the two interfering
devices.
• Consult 3M Technical Service.
NOTE: Changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate the
equipment.
CAN ICES-3 (B)/NMB-3(B)
WARRANTY AND LIMITATION OF LIABILITY
NOTE: The following statements do not apply in Australia and
New Zealand. Consumers should rely on their statutory rights.
WARRANTY: In the event any 3M Personal Safety Division
product is found to be defective in material, workmanship, or
not in confirmity with any express warranty for a specific
purpose, 3M's only obligation and your exclusive remedy shall
be at 3M's option, to repair, replace, or refund the purchase
price of such parts or products upon timely notification of the
issue by you and substantation that the product has been
stored, maintained, and used in accordance with 3M's written
instructions. EXCEPT WHERE PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY
EXPRESS OR IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR OTHER WARRANTY OF QUALITY, OR
THOSE ARISING FROM A COURSE OF DEALING,
CUSTOM, OR USAGE OF TRADE, EXCEPT OF TITLE AND
AGAINST PATENT INFRINGEMENT. 3M has no obligation
under this warranty with respect to any product that has failed
due to inadequate or improper storage, handling, or
maintenance; failure to follow product instructions; or alteration
or damage to the product caused by accident, neglect, or
misuse.
LIMITATION OF LIABILITY: EXCEPT WHERE PROHIBITED
BY LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL LOSS OR DAMAGES (INCLUDING LOST
PROFITS) ARISING FROM THIS PRODUCT, REGARDLESS
OF THE LEGAL THEORY ASSERTED. THE REMEDIES SET
FORTH HEREIN ARE EXCLUSIVE.
NO MODIFICATION: Modifications to this device shall not be
made without the written consent of 3M Company.
Unauthorized modifications may void the warranty and the
user's authority to operate the device.
To properly dispose of the battery, follow local solid waste
disposal regulations. Many rechargeable batteries are required
to be recycled by local, state/province, and national laws. To
properly recycle/dispose of the battery or battery pack, always
follow local solid waste disposal regulations. Additionally, in the
United States and Canada, 3M Company is partnering with
Call2Recycle (RBRC) to provide recycling service to you to
help ensure that the rechargeable batteries within our products
are recycled properly. To assist you in using this service,
call the Call2Recycle battery recycling information help line
at 1-800-8-BATTERY (1-800-822-8837) or consult
Call2Recycle's battery recycling guidance online at
www.call2recycle.org.
7

Publicité

loading