Introduction - GRUPPO PIAZZETTA 80 Mode D'emploi

Dear Customer,
We thank you for having chosen one of our products, the fruit of extensive and continuous research for a
superior product in terms of safety, reliability and performance.
In this manual you will find all the information and advice you need to use your product as safely and efficiently
as possible.

INTRODUCTION

It is recommended that Gruppo Piazzetta S.p.A.
material and accessories be used.
Gruppo Piazzetta S.p.A. provides pipes and
bends for the flue. Other pipes and bends
may also be applied after having checked the
compatibility of the coupling or adapted it,
bearing in mind that the pipes and bends must
be made to current standards and regulations.
In this case, however, Gruppo Piazzetta S.p.A.
only guarantees proper operation for its own
manufactured products that are used in
compliance with instructions.
This instruction booklet has been prepared by
the manufacturer and is an integral part of the
product. In the event of sale or relocation of the
product make sure this booklet accompanies
it, since the information contained in it is
addressed to the purchaser and to anyone
involved in the installation, use and maintenance
of the product.
See the paragraph "Warranty" in this instruction booklet for the terms, limitations and exclusions.
In line with its policy of constant product improvement and renewal, the manufacturer may make
changes without notice.
This document is the property of Gruppo Piazzetta S.p.A.; no part of it may be disclosed to third
parties without the written permission of Gruppo Piazzetta S.p.A. All rights reserved by Gruppo
Piazzetta S.p.A.
Gruppo Piazzetta S.p.A. designs and manufactures its products in compliance with the ISO 9001:2008
Quality System. The products are also made in accordance with harmonised European standards EN.
Gruppo Piazzetta S.p.A. products are CE approved.
Any alterations or repair work that is not authorised in writing invalidates the type-approval
certificate. In this case the product could be a danger for persons and property; the manufacturer is
relieved from all liability and may claim damages to its image.
16
Read the instructions and the technical
information contained in this manual carefully,
before proceeding with installation, use or any
repairs.
Compliance with the instructions in this
booklet guarantees the safety of persons and
of property; it also ensures more efficient
operation and an increased lifespan.
Gruppo Piazzetta is relieved from all and
any liability for damage or injury caused by
improper installation that is not in compliance
with current national or local regulations and
laws or caused by failure to comply with the
instructions regarding installation, use and
maintenance given in this instruction booklet.
The above also applies for any unauthorised
changes or alterations made to the product
or the installation of other than original spare
parts. Failure to comply with the instructions
contained in this instruction booklet could
jeopardise the safety of persons and
property, shorten product life and invalidate
the warranty.
H07025750 / DT2000730 – 11
DT2010001-01
Gruppo Piazzetta S.p.A.
DT2010489-01