Getting Started; Hooking Up The System - Sony CMT-DX400 Mode D'emploi

Getting Started

Hooking up the system

Perform the following procedures 1 to 7 to hook up your system using the supplied cords and
accessories.
FM antenna
Front speaker (Right)
1 Connect the speakers.
There is no right or left designation for the
speakers. Connect the speaker located on
the right side as viewed from the front of the
system to the SPEAKERS R jack, and the
speaker located on the left side to the
SPEAKERS L jack.
From the speaker
on the right side
Note
• Connect only one set of attached speakers.
From the speaker on
the left side
AM loop antenna
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
AM loop antenna
* Strip off an end-portion of wire covering.
Front speaker (Left)
Insert only the
stripped portion*
continued
GB
7