Télécharger
Partager
Imprimer la page
Alpine DPR-RDS1 Mode D'emploi
  1. Manuels
  2. Marques
  3. Alpine Manuels
  4. Électronique automobile
  5. DPR-RDS1
  6. Mode d'emploi
Alpine DPR-RDS1 Mode D'emploi

Alpine DPR-RDS1 Mode D'emploi

Masquer les pouces
1
2
3
4

Publicité

Liens rapides

Télécharger ce manuel
This Package Contains the Following:
DPR-RDS1
Antenna
iPod dock cable
Interface Unit
Power Harness

Publicité

loading

Manuels Connexes pour Alpine DPR-RDS1

Sommaire des Matières pour Alpine DPR-RDS1

  • Page 1 This Package Contains the Following: DPR-RDS1 Antenna iPod dock cable Interface Unit Power Harness...
  • Page 2 Step 1: Set the DPR-RDS1’s FM transmission frequency The frequency selector switch is located on the interface unit and is used to set the optimal transmitting frequency. Incorrect dip switch settings may cause the interface not to work properly or not to operate at all.
  • Page 3 Step 3: Install the DPR-RDS1 in the vehicle (continued) 4. You can access the factory antenna port located on the back of the radio. If the factory antenna cable is connected, unplug it and plug the universal antenna connector into the receptacle.
  • Page 4 Using the DPR-RDS1 Select the FM radio source on the radio and tune to the frequency that was selected on the interface unit. As soon as the radio is tuned to the appropriate frequency, audio from the iPod will be heard.