Audio Return Channel - Sony HT-NT5 Manuel D'instructions

completed, "DONE" appears in the front
panel display.
System Power Off Function
When you turn off the TV, the system
and the connected device will turn off
automatically.
Set [System Settings] - [HDMI Settings] -
[Standby Linked to TV] on the system to
[On] or [Auto] (page 55). The default
setting is [Auto].
Note
The connected device may not turn off
depending on the status of the device.
System Audio Control
Function
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system.
The volume of the system can be
adjusted using the TV's remote control.
If the TV sound was output from the
speakers of the system the previous
time you watched the TV, the system
will be turned on automatically when
you turn on the TV again.
Operations can also be made by the
TV's menu. For details, refer to the
operating instructions of your TV.
Notes
• Sound is only output from the TV if other
than [TV], [HDMI1], [HDMI2] or [HDMI3]
input is selected when using the Twin
Picture function on the TV. When you
disable the Twin Picture function, the
sound is output from the system.
• The number for the system's volume level
is displayed on the TV screen depending
on the TV. The volume number displayed
on the TV may differ from the number on
the front panel display of the system.
48
US
• Depending on the settings of the TV, the
System Audio Control function may not
be available. For details, refer to the
operating instructions of your TV.

Audio Return Channel

If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel, you can listen to TV
sound from the speakers of the system
without connecting an optical digital
cable.
On the system, turn [System Settings] -
[HDMI Settings] - [Audio Return
Channel] to [Auto] (page 55). The
default setting is [Auto].
Note
If the TV is not compatible with Audio
Return Channel, an optical digital cable
(not supplied) needs to be connected
(Refer to the supplied Startup Guide).
One-Touch Play Function
When you play content on a device (Blu-
ray Disc recorder, "PlayStation
connected to the system, the system
and TV are turned on automatically, the
input of the system is switched to the
input for the device played, and sound is
output from the speakers of the system.
Notes
• If [System Settings] - [HDMI Settings] -
[Standby Through] on the system is set to
[On] or [Auto] and the TV sound was
output from the speakers of the TV the
previous time you watched the TV, the
system does not turn on and the sound
and picture are output from the TV even if
device content is played (page 55).
• Depending on the TV, the beginning part
of content being played may not play
correctly.
4," etc.)
®