Replacing Activated Charcoal Filter - Bertazzoni KMC30X Instructions D'installation

Masquer les pouces Voir aussi pour KMC30X:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

These can be washed in the dishwasher, and need
to be cleaned whenever the S1 Led comes on or at
least once every 2 months use, or more frequently if
use is particularly intensive.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press T3 and hold for at least 3 seconds, until LED
Cleaning
of the unit and at the same time pulling downward.
changes color over time, this will have absolutely
• Replace, taking care to ensure that the handle
faces forward.
back in hood.

Replacing Activated Charcoal Filter

This cannot be washed or regenerated, and must
once every 4 months. The Alarm signal, if it has been
activated, only appears when the Suction motor is
turned on.
Resetting the alarm signal
• Turn the Lights and the Suction Motor off.
• Press T3 and hold for at least 3 seconds, until LED
Cleaning
(backwards) until it unlocks from the motor housing
and pull off sideways.
the side of the blower and push it inward. Then
• CAUTION: When used in recirculation mode, to
Reduce the Risk of Fire and Shock use only con-
version kit Model FILTER 1 or FILTER1LL.
LED LIGHTING UNIT
• LED lights must be replaced by Faber factory
authorized service.
31

Publicité

Table des Matières
loading

Table des Matières