REPLACING ACTIVATED CHARCOAL FILTER
The filter is not washable and cannot be regenerated, and must be replaced approximately
every 4 months of operation, or more frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards the back of the unit and at the same
time pulling downward.
• Remove the saturated charcoal filter by releasing the hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.
• "When used in recirculation mode, to Reduce the Risk of Fire and Shock use only conver-
sion kit Model # 901497.
Please contact the retailer that sold you the product to purchase carbon filters above.
REPLACING BULBS
LED lights must be replaced by authorized service.
W
27