Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning metal grease filters
The metal grease filters can be cleaned in hot detergent solution
or washed in the dishwasher. They should be cleaned every
2 months use, or more frequently if use is particularly heavy.
• Remove the filter, pushing the lever towards the back of the
unit and at the same time pulling downward.
• Wash the filter without bending it, leave it to dry thoroughly
before replacing (if the surface of the filter changes color
over time, this will have absolutely no effect on its efficiency).
• Replace, taking care to ensure that the handle faces forward.
• Cleaning in dishwasher may dull the finish of the metal
grease filter.
• No water can be present in filters before installing back in hood.
Replacing Activated Charcoal Filter
The Activated Charcoal Filters are not washable and cannot
be regenerated, and should be replaced approximately
every 4 months of operation, or more frequently with heavy
usage.
• Remove the Filter, pushing it towards the back of the unit
and at the same time pulling downward.
• Remove the saturated Activated Charcoal Filters, as indi-
cated (A).
• Fit the new Filters, as indicated (B).
• Replace, taking care to ensure that the handle faces forwards.
Caution: "When used in recirculation mode, to Reduce
the Risk of Fire and Shock use only conversion kit Model
Charcoal Filter kit sku #901531; Durable charcoal filter kit
sku #901532".
Please contact the retailer that sold you the product to
purchase carbon filters above.
Lighting unit
• Replace the lamp with a new one of the same type, making
sure that you insert the two pins properly into the housings
on the lamp holder.
Gu10 self-ballasted
led lamps – listed in
accordance with ul 1993/
nmx-j-578/1-ance/csa
c22.2 No. 1993
13
Publicité
Table des Matières
