Maintenance And Service - Bosch GLL100-40G Consignes De Fonctionnement/Sécurité

Securing with the universal
Positioning Device BM 1
(accessory) (see figure K)
Using the universal positioning device
(17), you can secure the measuring tool
on vertical surfaces, pipes or magnetizable
materials, for example. The universal
positioning device is also suitable for use
as a building tripod and facilitates height
adjustment of the measuring tool.
Roughly align the universal holder (17)
before switching on the measuring tool.
Working with the rotating mount
RM 10 (accessory)
Using the rotating mount (18), you can
rotate the measuring tool 360°. This
enables you to set up the laser lines
precisely, without having to change the
position of the measuring tool.
You can use the rotating mount (18) as
a floor stand or to attach the measuring
tool to vertical surfaces; alternatively, the
measuring tool can be attached to metallic
surfaces by means of the magnets (12) or
to crown mouldings in conjunction with
the ceiling clip (14).
Store and transport the tool only in the
supplied protective case.
Keep the tool clean at all times.
Do not immerse the tool into water or other
fluids.
Wipe off debris using a moist and soft cloth.
Do not use any cleaning agents or solvents.
Regularly clean the surfaces at the exit
opening of the laser in particular, and pay
attention to any fluff of fibers.
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service center for Bosch power tools.

Maintenance and Service

Roughly align the rotating mount (18)
before switching on the measuring tool.
Laser Enhancement Glasses
The laser goggles filter out ambient light.
This makes the light of the laser appear
brighter to the eye.
• Do not use the laser glasses as
protective glasses.
The laser glasses make the laser beam
easier to see; they do not protect you
against laser radiation.
• Do not use the laser glasses as
sunglasses or while driving. The
laser glasses do not provide full UV
protection and impair your ability to see
colours.
Example applications
(see figures I–K)
Examples of possible applications for
the measuring tool can be found on the
graphics pages.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the tool.
In case of repairs, send in the tool packed in
its protective case (21).
ENVIRONMENT PROTECTION
Recycle raw materials & batteries
instead of disposing of waste. The
unit, accessories, packaging &
used batteries should be sorted for
environmentally friendly recycling in accordance
with the latest regulations.
-15-
(Accessory)