AMG 98 BASE 8 Mode D'emploi page 47

Fan speed adjustment channeling (where present)
Display informations
OFF
21 : 10
The stove is off.
22°C P-1
OFF
START
14 : 35
The stove is switching on.
21°C P-2
Resistance
START
extractor are on.
LOAD PELLET
14 : 35
The stove starts loading
21°C P-2
pellets in the brazier.
LOAD
Resistance, smokes extractor
pellet
and gear motor are on.
menu 01
ADJUST
BLOWERS
menu 01
BLOW - 2 3
menu 01
BLOW - 2 5
menu 01
BLOW - 2 5
and smokes
MENU 01 - SETTING FANS
1. Press the SET button.
Will appear on the display MENU 01 SETTING
FANS
2. Pressing the SET key to access the menu to set
the speed of your funnel fans
3. Set the speed using the buttons 1 and 2. With
key 1 you set the speed of the right fan, with key
2 you set the speed of theleft fan
4. To turn off the fans of the funnel, set the speed
to 0
14 : 35
22°C P-1
FLAME
LIGHT
15 : 18
22°C P-3
WORK
15 : 18
22°C p-2
CADENCE
CLEANING
FLAME LIGHT
The stove starts loading
pellets in the brazier.
Smokes extractor and gear
motor are on.
WORK
The stove is working, in this
case with working power 3.
Detected room temperature
is 21°C. Smokes ventilator,
gear motor and
ventilator are on during this
phase
.
CADENCE CLEANING
The stove is cleaning the bra-
zier. The smokes extractor is
working at its max. speed and
the pellets loading is minimal.
room
15