AMG 98 BASE 8 Mode D'emploi page 45

Stove switching off
To switch off the stove, press the key on the control board until you read " " C L E A N I N G F I N A L C L E A N I N G F I N A L " " on the
display. After the stove has been switched off, the fan continues working for a set time in order to grant
a fast smokes exhaust from the combustion chamber.
If you have a model with remote control, you just need to switch the remote control off keeping the key
pressed for 2 seconds and confirming the selection pressing the key SEND.
If you try to switch on the stove during this phase, the display will show " " w a i t i n g c o o l i n g w a i t i n g c o o l i n g " " (that
means wait for cooling) in order to inform you a switching off phase is running. Wait until the cooling
phase is completely off and the display shows " " O F F O F F " " before staring a new light up.
REMARKS:
• Do not continuously turn the stove on and off as this could provoke sparks that could shorten the life
of the electrical components.
• Do not touch the stove with wet hands: the stove has electrical components that could produce sparks
if handled incorrectly. Only authorized technicians can resolve possible problems.
• Do not remove any screws from the fire chamber without first lubricating them well.
• Never open the glass door of the pellet stove while the stove is in operation.
• Be sure that the brazier basket is positioned correctly.
• The flue system must be suitable for inspecion. If it cannot be removed, it must have some holes for
inspection and cleaning.
13