Amann Girrbach PL900S Mode D'emploi page 38

C L E A N I N G A N D M A I N T E N A N C E
Interior
To clean the interior:
E N
▷ With the door shut, select the
function at the operational display.
The machine advances to the cleaning position.
▷ Clean the interior.
▷ End the cleaning via the operational display.
Spindle
The provided spindle service set and a milling tool
of your choice are required for maintenance of
the spindle.
5
4
Fig. 14 Service set for spindle
1 Collet grease
2 Collet brush
3 Felt cone
4 Ejector pin
5 Spindle wrench
To clean the spindle/collet:
▷ With the door shut, select the
function at the operational display.
The machine advances to the cleaning position.
In order to clean the spindle:
▷ Remove any dust from the spindle using a dry,
clean cloth. Do not use cleaning agents!
38
To remove the collet:
▷ Apply the black spindle wrench [5] over the col-
Cleaning > interior
1
Fig. 15
2
▷ Insert a milling tool into the open collet.
3
▷ Using the spindle wrench, unscrew the collet out
Cleaning > collet
Fig. 16
let.
5
of the spindle.
1.
2.