Type F 620 S-30 Tr - FLUX F 620 S-15 Notice D'instruction

3.3

Type F 620 S-30 TR

3
1 2
Fig. 3 Cross-section of F 620 S-30 TR (sample view)
Description:
Pump for horizontal use.
The pump can be mounted either horizontally on a console or vertically outside a container.
The pump is driven by a three-phase motor via a flexible coupling.
The drive shaft is mounted in the inner tube and sealed by a mechanical seal against the
liquid. The open conical rotor conveys the liquid through an external pipe tube to the pump
outlet.
Field of application:
Transferring of non-flammable liquids up to a viscosity of 2500 mPas from containers,
tanks, open basins etc.
The pump can be used for stationary or portable applications.
Characteristics:
Not safe to run dry, no pump for continuous use; motor changeable,
permanently lubricated shaft bearing; mechanical seal in the liquid area
Type designation
Delivery rate in m³/h
Delivery head in mWc
Viscosity in mPas
Operation temperature in °C
Storage temperature in °C
9
4 5 6
F 620 S-30 TR
Operating instructions centrifugal immersion pumps
1 Flexible coupling
8
2 Drive shaft stainless steel 316 Ti
3 Inner tube stainless steel 316 Ti
4 Outer tube stainless steel 316 Ti
5 Mechanical seal
Open conical rotor polypropylene
6
(PP) optional stainless steel (S)
7 Inlet housing
8 Cap nut
7
9 Screws
23
12
2500
0 to 100
> -10
35 / 80