Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Danger from splashing liquids!
The maximum operating pressure and the operating temperature
must not be exceeded.
High operating pressure may result in the containers, fittings,
pipelines or hoses bursting or becoming loose. Make sure that
excessive pressure does not result when filling a container.
Regularly check pipelines, fittings, hoses and connection cables to
ensure safe operation.
There may be liquid left in the outlet tube, which will then leak out.
Install appropriate splashguards for open barrels or containers.
Remove spilled liquid from the floor and dispose of it in an environ-
mentally sound manner.
Danger of electric shock!
Only start three-phase motors with an upstream motor-protection
switch installed.
For three-phase motors observe the safety instructions in the cable
terminal box.
Only qualified personnel may carry out installation work on three-
phase motors.
Comply with technical requirements of local power supply
companies.
Keep the pumped media away from the motor cable.
Comply with the operating instructions of the motor and the notes
in the cable terminal box.
Do not grip the three-phase motor on ventilator cap for carrying.
If the motor is exposed to aggressive vapours, there is a risk of
corrosion.
Do not expose the motor to the weather.
Attention!
Only use the pump for its intended purpose.
Do not leave portable pumps unattended.
Do not expose the pump to the weather.
The pump has to be used in vertical position only (except for
horizontal versions).
Always position the pump to prevent it from falling into the con-
tainer.
When exceeding the temperature limitations, the pump will be
damaged.
Only use the pump in connection with suitable pipelines, fittings
and hoses.
Regularly check the pipelines, fittings and hoses to ensure safe
operation.
Immerse the pump only up to the max. immersion length into the
liquid.
Operating instructions centrifugal immersion pumps
31 / 80
Publicité
Table des Matières
