Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 2.0
Position the eyelet pliers in such a way as to ensure that the rivet's flat base sits in the recessed ring of the rivet
holder (No. 2A).
Firmly press the eyelet pliers together to force the stem to curl outward, creating a flange to reinforce to rivet. Keep
pressing until the rivet stem is fully compact.
Lock the eyelet pliers by pushing the handles together and placing the wire clip on the rim just behind the rivet
holder and counterpoint (No. 1A).
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will prevent
unnecessary problems.
2. Keep the tool handles clean, dry and free from oil/grease at all times.
3. Follow instructions for lubricating and changing accessories.
4. Inspect the tool components periodically. Have damaged or worn components repaired or replaced by an
authorized technician.
CAUTION! Only qualified service personnel should repair the tool.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
PARTS BREAKDOWN
LEATHER PUNCH PARTS LIST
6
Leather Punch with Eyelet Pliers
No.
DESCRIPTION
1
Punch
2
Punch Wheel
Punch Wheel
3
Securing Lever
4
Securing Lever
5
Punch Support
6
Handles
For technical questions call: 1-800-665-8685
8308231
QTY.
6
1
1
1
1
1
Publicité
Table des Matières
