OPERATING YOUR BREVILLE SMART OVEN™ — COOKIE
6.
The LCD screen will indicate a blinking
'PREHEATING'. Once the oven has
reached the set temperature, the
temperature alert will sound.
7.
The timer will be displayed and
automatically begin to count down in
one minute increments.
8.
At the end of the pizza stone heating
cycle, the oven alert will sound three
times and the START/CANCEL button
surround will cease to illuminate.
9.
Now carefully place the frozen pizza on
the heated pizza stone.
NOTE:
If cooking a fresh pizza, we
recommend using protective hot
pads or insulated oven mitts to
remove the entire wire rack with
pizza stone, and place on the open
oven door or bench. This will assist
in transferring the fresh pizza dough
onto the heated pizza stone. Always
use protective hot pads or insulated
oven mitts to re-insert the wire rack
with pizza stone and pizza, inside
the oven.
10.
Select the desired pizza setting and
press the START/CANCEL button to
restart the pizza cycle.
34
BOV800XL_IB_ENG_FA.indd 34
BOV800XL_IB_ENG_FA.indd 34
COOKIE FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
The top middle element is off.
Rack Position
Middle rack height position.
Optional Settings
CONVECTION button
TEMPERATURE CONVERSION button
FROZEN FOODS button
The COOKIE function is ideal for baking
homemade or commercially prepared
cookies and other baked treats.
Ready-to-bake crescent rolls, cinnamon
scrolls, biscuits and strudels are ideally
baked using this function.
1.
Insert the wire rack into the middle rack
height position. The wire rack should
be positioned with the spokes facing
upwards.
2.
Close the oven door.
3.
Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
COOKIE function. The top fi gure on the
LCD screen indicates the preset
temperature of '350°F', while the bottom
fi gure on the LCD screen indicates the
preset time of ':11 MINS'. The preset
CONVECTION setting will also be
displayed.
5/5/09 9:44:03 AM
5/5/09 9:44:03 AM