Cleaning And Maintenance - MPM MSO-12M Mode D'emploi

5. Disassemble individual parts in reverse order to the assembly (snail extruder (8), extrusion
sieve (9), automatic cleaning module (10), main container with waste and juice outlet (5)).
===>
6. Wash all the parts thoroughly.

CLEANING AND MAINTENANCE

NOTE! Proper cleaning and maintenance extends the life of juice ex-
tractor. Since the juicer extracts minerals, including calcium, after
each use wash all the parts of appliance using agents that prevent
deposition of calcium.
1. Switch off the appliance before you start cleaning.
2. Clean the main body with a wet wipe (if necessary add
some detergent).
3. All parts that come in contact with the food must be cleaned thoroughly after each use in
hot water with a small amount of detergent, preferably once you finish using the appliance.
4. Do not clean the appliance using strong cleaning agents, acetone, acute materials, etc.
5. Clean the extrusion sieve thoroughly after each use. Brush (16), which is provided together
with the set, is ideal for cleaning this part.
6. Do not immerse the base of unit in water or any other liquids!
7. Any discolouration from carrots, oranges, etc. can be removed witha cloth soaked in cook-
ing oil
8. After cleaning and drying all parts, the juicer must be assembled (see section: "ASSEM-
BLING THE JUICER").
SIGNS OF MALFUNCTION
SIGNS
The engine is not running
The machine stops working
"Jam" in the inlet channel
Pulp ceases to escape
20
– the power cord is plugged
– the upper lid is properly closed
– something is clogged when loading the products to be processed.
– the appliance is properly assembled
– it is not overloaded
– the product to be extruded is prepared in appropriate pieces
– If you juice a lot of soft products, try alternately pushing them with a hard product (e.g.
push orange or apple with a carrot). Choose fresh products with no signs of rotting
– Turn the switch to reverse position a few times.
– Do not overfill the inlet channel with products, insert the products one by one, wait
until they are processed.
– If the cause is still unknown clean and reassemble the appliance.
– Push with a hard product
MAKE SURE