Description Of The Appliance; Before First Use - MPM MSO-12M Mode D'emploi

DESCRIPTION OF THE APPLIANCE:

1.
Workstation/housing
2.
Switch
3.
Non-slip feet
4.
Container for juice (1000 ml) and waste
(800 ml)
5.
Main container with outlets for waste
and juice
6.
Cover
7.
Pusher
8.
Snail extruder
9.
Stainless steel extrusion sieve
10. Automatic cleaning module
11. Sealing sleeve
12. Lockable juice outlet
13. Waste outlet
14. Rubber plug

BEFORE FIRST USE

1. Take the appliance out of the box, remove all protective cardboards and foil.
2. Wash the appliance thoroughly, in particular the parts which come in contact with the
food.
3. The juice extractor is equipped with a safety system - the appliance can work only if the lid
is assembled properly (6).
JUICE EXTRACTOR ASSEMBLY
14
A
B
16
11
Insert the rubber plug (14) into the hole on the bottom of the container (5) and the sealing sleeve
1
(11) in the container (5), if not previously installed.
Place the appliance on a smooth, stable and flat surface. Mount the container (5) on the workstation,
2 so that the 3 protrusions (B) on top of the housing fit into 3 recesses (A) on the bottom of the
container (5). Next, insert a plug onto the juice outlet opening.
15. Tray
16. Cleaning brush
The appliance is equipped with a
switch.
0
appliance is switched off
1
switching on the appliance
R
rotation in the opposite direc-
tion, the so called reverse gear,
to run it, press and hold the
button