Backlight - TFA 60.2530.05 Mode D'emploi

TFA_No. 60.2530_anl_06_15
Radio-controlled alarm clock
• On the display for the temperature appear ALM 2 and 7:00 (default) or the last adjusted
alarm time.
• Press the ▲ or ▼ button briefly to adjust the desired alarm time.
• Confirm the setting with the AL SET button.
• On the display appear the adjusted alarm time and 7:00 for the second alarm time will
be flashing.
• Press the ▲ or ▼ button again to adjust eventually the second alarm time in the same
way.
• Press the AL SET button again to return to the current time.
4.7 Activate and deactivate the alarm time
• To activate the corresponding alarm function, move the switch ALARM upwards (ON).
• The alarm time and the corresponding symbol appear on the display.
• When the adjusted alarm time is reached, the alarm will ring.
• Press any button and the alarm will stop.
• If the alarm is not stopped manually, the increasing alarm will automatically turn off
after certain minutes and will be reactivated at the same time.
• The alarm symbol remains on the display.
20
25.06.2015 15:10 Uhr Seite 11
Radio-controlled alarm clock
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function will
be activated.
• Once the snooze function will be activated, the alarm symbol will be flashing on the dis-
play.
• The alarm will be interrupted for 4 minutes.
• The snooze function can be activated up to eight times.
• Slide the ALARM switch downwards (OFF), to deactivate the alarm and the snooze
function.
• The alarm symbol disappears on the display.
• On the display appears the date or the temperature.

4.8 Backlight

• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
5. Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if you do not use the device for a long period of time.
• Keep the device in a dry place.
• Do not place your device near extreme temperatures, vibrations or shocks.
21