Breville Blend Active Pro VBL212X Instructions page 4

Use the grinding mill with the blade assembly to finely grind nuts,
seeds, and cereals before adding these to your favourite recipes.
DO NOT USE THE GRINDING MILL TO GRIND WET FOODS
(GARLIC, ONIONS, ETC.).
Add the ingredients to the grinding mill. Don't fill more than half full.
Screw the blade assembly onto the grinding mill, tighten firmly, and
attach to the motor unit properly . Press the blend button to pulse
E
in short bursts to achieve the desired texture.
HOW TO USE THE COMPACT FOOD PROCESSOR
The compact food processor must only be used with the
Breville Blend Active motor unit. The blades have very sharp
® ™
edges. Take care when handling or cleaning them. 1 2 3 4 5 6
1. Add the ingredients to the food processor bowl. Don't overfill 7 8 A B C D
the bowl ( ).
E F G H I J
1 2 3 4 5 6
2. Push the chopping blade onto the spindle of the blade
7 housing. Turn the blade anticlockwise until the locking tabs 8 A B C D
align ( ).
E F G H I J
1 2 3 4 5 6
3. Turn the blade housing upside down. Line up the symbol
on the blade housing with the 7 8 A B C D symbol on the food
processor bowl ( ).
E F G H I J
4. Twist the blade housing clockwise until the symbol
is aligned with the symbol on the bowl, and the lock
mechanism 'clicks' into place.
1 2 3
5. Turn the food processor upside down so that the blade
housing is at the bottom. Line up the 7 symbol on the blade 8 A
housing with the symbol on the rim of the motor unit (
E F G
6. Gently press the food processor downwards, then twist it
clockwise until the symbol on the blade housing is aligned
with the symbol on the rim of the motor unit.
The food processor will not work unless it is correctly
positioned on the motor unit.
7. Press and hold the blend button on the motor unit to operate.
8. When you have finished processing your ingredients, and
the blades have stopped rotating, twist the food processor
anticlockwise until the symbol is aligned with the
symbol and remove.
9. Turn the food processor the right side up, then twist the blade
housing anticlockwise to release the locking mechanism.
Take care when removing the blade housing from the bowl to
avoid spillage.
10. Remove the food processeor blade from the blade housing by
turning clockwise to unlock and pulling upwards.
Compact Food Processor Guidelines
Food Preparation Process time
parsley (15g) remove stalks blend 5 seconds
onions, small- peel and quarter pulse 4-5 times,
medium (100-200g) blend 5 seconds
6
VBL212X_17MLM1.indd 6-7
Food Preparation
shallots (175g) peel, leave
whole
spring onions remove excess
(100g) green and halve
garlic peel, leave
(2 cloves-1 bulb) cloves whole
chillies (1-4) remove seeds
and stalk
ginger (15-50g) peel, leave
whole
mixed nuts leave whole
(50-200g)
bread (50g, for tear into pieces
breadcrumbs)
sweet-meal biscuits break in half
(100g)
CLEANING
DO NOT IMMERSE THE MOTOR UNIT, POWER CORD OR PLUG
IN WATER OR ANY OTHER LIQUID.
• For ease of cleaning, we recommend that you clean the bottle,
cap, grinding mill, food processor blade housing and food
4 5 6
processor bowl as soon as you have finished using them.
B C D
• Clean the motor unit with a damp cloth only.
).
H I J
• Wash the blade assembly and food processor blade in warm,
soapy water. Rinse and dry thoroughly. For stubborn food
deposits stuck around the blade, carefully use a washing up
brush.
1 2 3
• All components are dishwasher safe, except for the food
processor blade housing. (Page 3 )
7 8 A
• To clean the blade housing, half fill the food processor bowl
E F G
with warm soapy water, then fit the food processor blade and
blade housing to the bowl. Fit the food processor onto the motor
unit as described in the section How to use the compact food
processor. Press and hold the blend button on the motor unit for
10–20 seconds. Wipe the upper surface of the blade housing to
remove excess water, and dry thoroughly.
QUICK CLEANING METHOD
1. Half fill the bottle with warm water and a drop or two of
detergent then fit the blade assembly. Fit the blade/bottle onto
the motor body as described in the section How To Use.
2. Press the bottle downwards for 10-20 seconds.
3. Remove the bottle, unscrew the blade assembly and rinse
them both under running water.
STORING
Store your Breville Blend Active blender in its packing or in a
® ™
clean, dry place. Ensure all parts are dismantled and keep the
Process time
appliance out of the reach of children.
blend 5-10
blade assembly for greater protection.
seconds
GUARANTEE
blend 10-15
Please keep your receipt as this will be required for any claims
seconds
under this guarantee.
blend 5 seconds
This appliance is guaranteed for 2 years after your purchase as
described in this document.
blend 5-10
During this guaranteed period, if in the unlikely event the appliance
seconds
no longer functions due to a design or manufacturing fault, please
blend 5 seconds
take it back to the place of purchase, with your till receipt and a copy
of this guarantee.
blend 5 seconds
The rights and benefits under this guarantee are additional to your
statutory rights, which are not affected by this guarantee. Only
pulse, then blend Jarden Consumer Solutions (Europe) Limited ("JCS (Europe)") has
15-20 seconds
the right to change these terms.
JCS (Europe) undertakes within the guarantee period to repair
blend 5-10
seconds
or replace the appliance, or any part of appliance found to be not
working properly free of charge provided that:
• you promptly notify the place of purchase or JCS (Europe) of
the problem; and
• the appliance has not been altered in any way or subjected to
damage, misuse, abuse, repair or alteration by a person other
than a person authorised by JCS (Europe).
Faults that occur through, improper use, damage, abuse, use with
incorrect voltage, acts of nature, events beyond the control of
JCS (Europe), repair or alteration by a person other than a person
authorised by JCS (Europe) or failure to follow instructions for use
are not covered by this guarantee. Additionally, normal wear and
tear, including, but not limited to, minor discoloration and scratches
are not covered by this guarantee.
4 5 6
The rights under this guarantee shall only apply to the original
B C D
purchaser and shall not extend to commercial or communal use.
H I J
If your appliance includes a country-specific guarantee or warranty
insert please refer to the terms and conditions of such guarantee or
warranty in place of this guarantee or contact your local authorized
dealer for more information.
Waste electrical products should not be disposed of with Household
waste. Please recycle where facilities exist. E-mail us at enquiries
enquiriesEurope@jardencs.com for further recycling and WEEE
information.
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside
Cheadle Royal Business Park
Cheadle
SK8 3GQ
United Kingdom
FITTING A PLUG - UK AND IRELAND ONLY
Attach the grinding mill to the
If the plug is not suitable for the socket outlets in your home, it can
be removed and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover
must be refitted. The appliance must not be used without the fuse
cover fitted.
If the plug is unsuitable, it should be dismantled and removed from
the supply cord and an appropriate plug fitted as detailed. If you
remove the plug it must not be connected to a 13 amp socket and
the plug must be disposed of immediately.
If any other plug is used, a 5 amp fuse must be fitted either in the
plug or adaptor or at the distributor board.
This symbol indicates that this unit is a Class II
appliance and therefore an earth connection is not
required.
Do Not Connect
Mains Wires Here
(Neutral)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
5 amp fuse
Blue
Brown
(Live)
Ensure that the outer sheath of
the cable is firmly held by the cord grip
7
1/23/18 09:07