Mounting The Attachment; Flush-Mounted Installation Of The Hobs - bora CC 21 Instructions De Montage Et D'utilisation

Assembly instructions

Mounting the attachment

Mounting the attachment
BORA Classic built-in appliances can be combined as required.
Depending on the installation situation, the following dimensions
result for the opening:
Hob extractor
Hobs
1
2
3
2
3
Please note
A gap of 2 mm must be provided for between all the built-in
appliances.
Hob Dimension
extractor B in mm
- 320
- 662
- 1004
1 754
2 1188

Flush-mounted installation of the hobs

When the hobs are flush-mounted, the worktop must be provided
with the following groove dimensions:
Flush-mounted
BORA Classic built-in appliances can be combined as required.
Depending on the installation situation, the following dimensions
result for the groove and the opening:
Hob extractor
Hobs Hob
extractor
1
2
3
2
3
Please note
A gap of 2 mm must be provided for between all the built-in
appliances.
GB
Dimension Dimension
A in mm B in mm
- 344
- 686
- 1028
1 778
2 1212
320
662
1004
754
1188
27