Safety Warnings - Nakayama MB7005 Manuel De L'utilisateur

EN

Safety warnings

1) Please read carefully the operation manual before using the machine. Make sure to get familiar with the methods of operation of this machine and its con-
trols. Understand how to immediately terminate the operation of the machine.
2) Children are not allowed to use this machine! No adult is allowed to use the machine before reading carefully the manual!
3) Ensure no other persons or things with potential safety risk, especially children and pets, are within the working area!
Preparation
1) Check thoroughly the working area and remove all obstacles which when interfered could lead to an accident.
2) Before starting the engine, always place put the gear shifting handle in neutral position!
3) Don't operate the machine without wearing proper clothing. If the working area ground is slippery, wear a pair of anti-skid shoes to improve your standing
stability.
4) Take care when treating fuel, which is inflammable! Pay attention to the following rules:
a) Use an appropriate container to hold the fuel.
b) When the engine is running or is hot, never attempt to refuel it.
c) Take extra care when refuelling the engine outdoors; never try to fuel the engine indoors!
d) Before starting, tighten the fuel tank cap and wipe off any fuel spilled out!
5) Never try to make any adjustments while the engine is running!
6) Always wear safety glasses when making any adjustments on the machine, for example, preparation and maintenance of the machine.
Operation
1) When starting the engine, the shift lever should always be placed in the neutral position. Keep a safe distance from all moving parts of the machine.
2) When operating the machine on (or while crossing) cobbled roads, sidewalks, or highways, stay alert to the traffic conditions to notice any potential traffic
risk! Never use the machine to carry any passenger!
3) If the machine bumps against any obstacles, please turn off the engine immediately, and thoroughly check whether the machine has been damaged, if so,
repair it before restarting and operating it.
4) Always pay attention to the surrounding conditions to avoid slipping down, or dropping.
5) If the machine produces abnormal vibrations, turn off the engine immediately! Try to identity the fault, it's important because abnormal vibration normally
is harbinger of fault.
6) Before leaving the operating position to repair, adjust, check or remove of things jammed between blades, always remember to shut off the engine first!
7) If the machine is to be left uncared by the operator, all necessary preventive measures, such as disengaging power output shaft, lowering of accessory de-
vices, shift to neutral position of gear shift lever, and shutting off the engine shall be taken first!
8) Before cleaning, repair or checking the machine, the operator must shut off the engine and ensure all moving parts are in a stationary state!
9) Engine's emission is hazardous, so never try to run it indoors!
10) Never operate the mini tiller without proper protection equipment, guard or other protection devices in place!
11) When the machine is running, always keep it away from children and pets!
12) Never overload the machine with a big tilling depth and a high speed!
13) The machine is not allowed to run at a high speed on a slippery road. Watch back to take care when driving backward!
14) Never allow any looker-on to approach a running machine!
15) Only the accessory devices and equipment (like the counter weight) allowed by the manufacturer of the mini tiller may be used
16) Never try to operate the mini tiller when the view is limited or lighting conditions are poor!
17) Take care when tilling a hard field, because the blades may hook into the ground, hence pushing the mini tiller forward. If such a result does occur, just let
free the handle and don't try to control the machine!
18) Never operate the mini tiller on an abrupt slope!
19) Take care not to let the machine turn over when it is ascending or descending a slope!
Repair, maintenance and storage
1) Check at a fixed interval whether bolts under shear stress, mounting bolts of engine and other bolts are tightened properly, so as to ensure the machine can
work safely.
2) The machine shall be stored indoors and away from flames, and please cool the engine before storing it.
3) If the mini tiller is to be stored for a long time, the manual shall always be kept as an important material.
4) Don't repair the machine at will unless you have the proper tools and the manual to instruct disassembling, assembling and repairing of the machine.
Safety symbols
The following symbols are to remind you that if you don't pay attention, you might be severely injured.
Please carefully read the symbols and notices about safety in the manual.
If these symbols peel off or are illegible, please contact the distributor to replace such symbols.
CAUTION
Before operation be sure to add specified engine
oil into the crankcase. Please refer to the owner's
manual for further information.
Location: Fuel tank
WARNING
Check that there is no fuel spilled or
fuel leakage.
Filling fuel before stopping the engine
is forbidden.
Location: Fuel tank
3
MAINTAIN AIR CLEANER
Clean up in cleansing solvent and dry up
once every 50 hours (every 10 in dusty
circumstances) and then immerse in clean
engine oil until saturated, squeeze out the
excessive oil.
Location: Air filter
WARNING
Among engine exhaust emissions there is toxic
CO, so never use in an enclosed room without
good ventilation.
Location: Fuel tank
WWW.NAKAYAMATOOLS.COM
Location: Fender
Location: Fender