Hayward AQUARITE FLO ADVANCED Guide De L'utilisateur page 24

10.1
10.1 System settings.
10.6
10.6 Sets the screen configuration.
10.10
10.10 Sets the password.
Connection
WIFI MODULE

Red

Yellow

Green

Black
10.18
10.18 Select AP: Manually enter
the name and the password of the
network selected.
Page 10 of 12
10. SYSTEM SETTINGS – Manual mode
10.2
10.2 Sets the language.
10.7
10.7 Sets the lighting intensity
of the screen display (0-100%) and
programs its ON/OFF timers.
10.11
10.11 Password: Protects user
access to the menu by activating
a password. Press a combination
of 5 keys and the system will
memorize it. If you forget the
password, there is a 'master
password'.
Ask your installer/supplier.
10.1. WIFI CONFIGURATION
10.15
10.15 Internet: Once the WIFI
module is connected, restart
your unit. The Internet option will
appear in the Settings menu.
10.19
10.19 System settings: For a more
detailed configuration enter
into this menu or contact your
installer.
USE ONLY GENUINE REPLACEMENT PARTS
AquaRite Flo Advanced
10.3
10.3 Choose your preferred
language.
10.8
10.8 Sound settings.
10.12
10.12 Cell timings: Counters of
time of operation for the various
modules.
10.16
10.16 WIFI: Select WIFI to scan for
available networks that the module
can access. The search will be
carried out automatically.
10.20
10.20 Status: Check the status of
your connection.
10.4
10.4 Sets the current date and time.
10.9
10.9 Sound: Programming the
system to emit sounds for the
following functions: Keyboard
(keys); Notices (pop-up message);
Alarms (operating alarm); Filtration
(start of filtration).
10.13
10.13 System information
10.17
10.17 Select the desired network
that the WIFI module can access.
Enter the password in the pop-up
keyboard. Scroll up and down with
the up/down keys and left to right
with the plus/minus keys. To select
a letter press OK.
10.5
10.5 Enter the current date and
time.
10.14
10.14 System information:
Information about the software
versions of the TFT display and the
power module.
It also shows the ID node which is
required to configure the system's
WIFI connection.
Once the WIFI module has
been connected to the network
and both lights are ON, go to
www.poolwatch.hayward.fr.
Access the Register option and
enter all the data requested.
The unit ID node can be found
on your device
(see section 10. System
Settings - screens 10.13 &
10.14). Upon completion of
the process, you will have
total control over your pool
and you will be able to change
parameters such as setpoints
or filtration times.
Rev. A