Using The System; Remote Start - Python 4110P Guide Du Propriétaire

Using the system

Lock
Press and release
Doors lock. The horn honks once, and the parking lights flash.
To Lock and Panic
Press and hold
Panic to be effective,the optional horn honk feature must be con-
nected. Press the
Unlock
Press and release
The doors unlock. The horn honks and the parking lights flash.

Remote Start

Press and release
Activates (or if On, deactivates) the remote starter. The engine turns On,
or the engine turns Off accordingly. The parking lights flash.
If a Remote start configuration issue prevents the engine from starting,
the parking lights flash a Remote Start fault report to identify the fault.
AUX
Press and hold
An optional auxiliary function such as trunk release may be controlled
by pressing and holding
© 2014 Directed. All rights reserved.
AUX
AUX
AUX
. To lock the system, then activate Panic. For
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
or
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
AUX
for approximately two seconds.
button to stop Panic output.
AUX
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case to
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
5