Remote Control
Feature
Internal Antenna
Transmit LED
Command buttons (4)
AUX
AUX
AUX
Remote control functions
AUX
AUX
AUX
The remote buttons are used to send commands to the system. The but-
tons indicated below are for standard configuration.
Standard configuration
Button
The lock function is controlled by pressing
for one second. When held for approximately two seconds, Panic is
activated.
AUX
AUX
AUX
Button
The unlocking function is controlled by pressing
AUX
AUX
trol for one second. You can also turn Panic off with this button.
AUX
Button
Silent Mode
™
pressing
. Silent Mode works by pressing
second before locking or unlocking. An optional auxiliary function such
as trunk release may be controlled by pressing and holding
approximately two seconds.
© 2014 Directed. All rights reserved.
Description
Used for transmitting information
AUX
AUX
Active when transmitting information
AUX
Used to perform arming, disarming, auxiliary channel and
remote start commands
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case together.
and an optional auxiliary function are controlled by
Your 1-way remote coin cell battery can be changed by using a small at blade screwdriver to pry case apart. Replace battery and then snap case togethe
on the remote control
AUX
AUX
AUX
AUX
AUX
on the remote con-
Your 1-way remote coin cell battery can be changed by using a small at blade screwdri
AUX
Your 1-way remote coin cell battery can be changed by using a sma
for less than one
for
3