Siebert SX202 Série Manuel D'utilisation page 31

Menu item
F Display test
U Saving
The factory settings are marked with an *.
Error detection
If the unit detects an error Errn will be displayed in the menu display. n signifies
the kind of error:
Err1
Error
Kind of error Parameter fault
Cause The operation mode set in the master is not corresponding to that set in
the menu.
Solution Select the same operation mode in the menu which has been set in the
master.
BAL SX202 PFB M 1.0
Setting
No display test at power-on*
Display test at power-on
Demo operation mode
Saving parameters* (Set)
Not saving parameters (Escape)
Resetting to the default settings (Default)
Menu display
F ----
F 8888
F PlAy
U Set
U EsC
U Def
31