Technical Data - LaserLiner VideoInspector 3D Mode D'emploi

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

Technical Data

Diameter / Length camera head
Screen type
Display resolution
Image format / Video format
Lighting
Digital zoom
Memory
Protection class
Min. bending radius camera probe 75 mm
Connections
Camera resolution
Field of view (FOV)
Depth of field (DOF)
Diameter / Length camera probe
Power supply
Operating time
Charging time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=AIH
ø 6 mm / 74 mm
3.5" TFT colour display
640 x 480 pixels
JPEG / MP4
7 brightness levels
10 zoom levels
Micro-SD memory card up to 8 GB
Base unit: IP 54 /
Camera probe: IP 68 (immersion depth 1 m, 60 min.)
Micro USB, power supply unit 5V/DC
960 x 720 pixels
85°
2,5 ... 10 cm
6 mm / 1 m
Li-ion battery pack 3.7V/1.7Ah / power supply unit 5V/DC / 2A
approx. 3.5 h
approx. 4 h
-10°C ... 50°C, max. humidity 20 ... 85% rH, no condensation,
max. working altitude 4000 m above sea level
-20°C ... 60°C, max. humidity 80% rH
115 x 190 x 115 mm (not including flexible tubing and holder)
485 g (incl. battery pack and flexible tubing / without holder)
VideoInspector 3D
Technical revisions reserved. 21W41
23
EN