Safety Instructions - LaserLiner VideoInspector 3D Mode D'emploi

Safety instructions

Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limit values
in accordance with EMC-Directive 2014/30/EU.
Safety instructions
Dealing with electromagnetic interference
– The measuring device complies with the provisions and limit values for safety and electromagnetic
compatibility in accordance with Directive 2014/35/EU (low voltage/LVD) and the Directive 2014/30/EU
(electromagnetic compatibility/EMC).
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of
people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference
or be subject to hazards or interference.
1
2
3
MENU
SET
4
ESC
1 Operation indicator
2 LCD
3 Hot keys
4 Joystick to turn
the camera head
5 HDMI interface
6 Micro USB interface /
Charging socket
7 Micro SD card slot
NOTE: The VideoInspector 3D delivers sharp images in a range between 2.5 and 10 cm from the camera head.
Objects outside this range may appear blurred.
14
EN
5
6
7
8
9
10
8 Connection
for flex cable
9 Trigger
10 Battery compartment
11
Camera head
12 LED
13 Lens
14 Magnetic
holder
13
12
11
14
a ON/OFF / Still image
b Rotation 180° /
Menu control
c Media gallery
Image / video
d Cancel
e
Settings mode /
Confirm /
Select recordings /
Delete recording
3
a e
g
f
b
h
c d
f Image / video
selection
g Menu control
h
LED lighting