General Safety Instructions - LaserLiner VideoInspector 3D Mode D'emploi

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
Function / Application
This inspection camera features a micro-camera which sends colour video images to the LCD so that
areas which are difficult to access (cavities, shafts, masonry or inside cars, for example) can be checked.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope
of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– When using the device outdoors, make sure that the weather conditions are appropriate and/or that
suitable protection measures are taken.
– Use the power supply/charger unit only in closed rooms; do not expose to moisture or rain otherwise
risk of electric shock.
– Charge the device's battery completely prior to use.
– Use only genuine accessories. Use of inappropriate accessories will invalidate the warranty.
– Charging is completed when the LED indicator lights green.
– A red battery symbol with an exclamation mark is shown on the display when the battery charge is low.
– The battery can also be charged while using the device.
– Disconnect the power pack from the mains when the device is not in use.
– The LCD unit must not be immersed in water. The base unit must not come in contact with liquids.
– The camera head is not acid-resistant or fireproof.
– Make sure that the VideoInspector 3D does not come into contact with chemicals, power sources,
moving or hot objects. This can damage the device and put its user at risk of serious injury.
– The measuring head can become very hot during operation and may damage sensitive materials.
– The VideoInspector 3D must not be used for medical examinations / examining people.
– To maintain the IP 68 protection class, the caps on the connections must be firmly locked in.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
Safety instructions
Using artificial, optical emission (OStrV)
LED outlet
– The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of
applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– When used for the intended purpose and under reasonably foreseeable conditions, the accessible
radiation of the LEDs is safe for the human eye and skin.
VideoInspector 3D
13
EN