Metabo EC 1315S Manuel D'utilisation Et Consignes De Sécurité page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Do not modify the plug provided. If it will not fi t the
outlet, have the proper outlet installed by a qualifi ed
electrician.
WARNING:
Improper
the
conductor can result in a risk
of electric shock.
3. We recommend that you never disassemble the
compressor or try to do any rewiring in the electrical
system. Any repairs should be performed only
by metabo HPT Service Centers. Should you be
determined to make a repair yourself, remember
that the green colored wire is the "grounding" wire.
Never connect this green wire to a "live" terminal. If
you replace the plug on the power cord, be sure to
connect the green wire only to the grounding (longest)
prong on a 3-prong plug.
Check with a qualifi ed electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to whether
the compressor is properly grounded.
WARNING:
Avoid electrical shock hazard. Never use this compressor with a damaged or frayed
electrical cord or extension cord. Inspect all electrical cords regularly. Never use in or
near water or in any environment where electric shock is possible.
connection
equipment-grounding
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OTHER USERS OF THIS TOOL!
4. Replace a damaged or worn cord immediately.
5. This product is for use on a nominal 120-V circuit and
has a grounding plug similar to the plug illustrated in
Fig. 1. Only connect the product to an outlet having
of
the same con-fi guration as the plug. Do not use an
adapter with this product.
6. Never use an electrical adapter with this
grounded plug.
Ground
outlet box
Grounding pin
AND
English
120 V grounded outlet
Fig. 1
9

Publicité

Table des Matières
loading

Table des Matières