cleaning
PLEASE notE!
❐ Always remove the mains plug from the plug socket before cleaning the filters and emptying
the dust container.
❐ Make sure that all items are completely dry befor reassembling the device!
❐ Do not use any corrosive or abrasive cleaning agents to clean the housing. They could
damage the surfaces.
❐ Always use the vacuum cleaner only with the dust container fitted and with the motor
protection filter and exhaust air filter installed.
Emptying the dust container
08190_DE-GB-FR-NL_V3.indb 26
All manuals and user guides at all-guides.com
1. Empty the dist container at the latest when it is filled to the MAX
mark.
2. Press the release button and pull the container up and out at the
same time.
3. Hold the dust container over an open dustbin.
4. Press the button to empty the dust container. The bottom of the
dust container opens and the dirt falls out.
5. Close the bottom of the dust container again. It must engage audibly.
6. Place the dust container back into the vacuum cleaner. The arrow
alongside the release button faces towards the arrow on the vacuum
cleaner housing. Press down the dust container until it engages
audibly.
26
20.11.12 15:18