Electrical Safety - Power Fist 9054685 Mode D'emploi

9054685
KICKBACK PRECAUTIONS
Kickback is a sudden reaction when the drill bit snags or is caught on the
material. If kickback occurs:
• The drill bit may pass over a body part, causing a seriously injury
• The tool may strike bystanders.
• Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1. Maintain a firm grip on the tool and position your body and arms to allow
you to resist a kickback. Kickback will propel the tool in the direction
opposite the drill bit's direction of rotation. The tool may pull out of your
grasp.
a. Use clamps or a vice to hold down smaller workpieces.
2. Only use a drill bit designed for the tool.
3. Large panels may sag under their own weight. Place supports under the
panel on both sides of the work area.
4. Always make sure the work surface is free from nails and other foreign
objects. Striking a nail can cause the drill to jump and damage the drill bit.

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1. Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the drill to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
www.princessauto.com / 1-800-665-8685
LI-ION CORDLESS HAMMER DRILL V1.0
Page 8