Battery Maintenance; Cleaning The Charger; Battery Storage - Power Fist 9054685 Mode D'emploi

9054685

BATTERY MAINTENANCE

Avoid the risk of battery short circuits during transport, storage or disposal by
isolating both terminals with adhesive tape or pack the battery in a plastic bag
or a cardboard box.
1. The longest life and best performance can be obtained if the battery pack
is charged when the air temperature is between 50 to 86°F (10 to 30°C). Do
not charge the battery when the temperature is below 32°F (0°C) or above
104°F (40°C). This is important and will prevent damage to the battery
pack.
2. Charge the battery at rates recommended by the manufacturer.
CLEANING
1. Remove all swarf from the machine with a vacuum cleaner or compressed
air. Focus on removing dust from the motor' s fan vents.
2. Thoroughly clean all surfaces.

CLEANING THE CHARGER

1. Only clean with a damp cloth. Avoid using solvents when cleaning plastic
parts.
2. To reduce risk of electric shock, unplug the charger from the outlet before
attempting any cleaning. Removing the battery pack will not reduce this
risk.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the
steel parts to avoid rust. Remove the lubricant before using the tool again.
1. Components should be kept dry, with machined surfaces lightly oiled.
2. Always remove the drill bit and store in a safe place.
3. Never store equipment in a wet/damp environment.

BATTERY STORAGE

IMPORTANT! Remove the battery when not in use for an extended period
of time to prevent damage.
www.princessauto.com / 1-800-665-8685
LI-ION CORDLESS HAMMER DRILL V1.0
Page 16