9054685
a.
Make sure the bit's shank size matches the chuck size (see
Specifications)
b.
Tighten the chuck so the shank is tightly held with no room to move.
3.
Always hold the tool firmly in your hands before switching the tool ON.
The reaction to the motor' s torque may cause the tool to twist, as it
accelerates to full speed.
4.
Do not use the drill as a router or try to elongate or enlarge holes with the
drill bit. The drill bit can break and cause an injury.
5.
Never attempt to change the drill bit's direction of rotation while it is
active. This can damage the interlock feature built into the switch. Be
sure the drill bit has completely stopped and engage any safety features
before changing the rotation direction. Turn the power off as an added
precaution.
6.
Hardened gum and wood pitch on a drill bit slows the drill down and
increases the potential for binding. Remove the drill bit from the drill, then
clean it with hot water, kerosene or gum and pitch remover. Never use
gasoline. Allow to dry before using. Discard the drill bit if the gum or pitch
cannot be removed.
7.
Clean the drill's air vents often. The motor' s fan will draw dust and other
particulates into the tool. Excessive accumulation of wood, plastic or
metal particulates can create a fire or electrical hazard.
8.
Do not cool the drill bit with any liquid when hot. This can damage the
drill bit by weakening the material, making the accessory unsafe for use.
9.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
POWER TOOL PRECAUTIONS
1.
Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualified technician must repair and verify the power
tool is operating correctly, before it can be used.
2.
Shut the power off and disconnect the drill from the power supply (if
possible) before making any adjustments, changing accessories, cleaning,
servicing or when storing. Such preventive safety measures reduce the
risk of starting the tool accidentally.
www.princessauto.com / 1-800-665-8685
LI-ION CORDLESS HAMMER DRILL
V1.0
Page 6