Table des Matières
Publicité
III) Adjusting the transport handle
To adjust the transport handle, please press the two red buttons on the sides of the transport
handle with both hands at the same time and adjust it. The buttons lock into place as soon as
the next position of the handle is reached. This is confirmed by an audible „click".
The handle can be adjusted to the following four different positions (see Fig. G):
1. Use in the car
2. Transport
3. Sleep and cradle position
4. Sitting position (no cradle function)
IV) Care instructions
•
The fabric parts or the seat unit can be washed with warm soapy water.
•
Hand washing at a temperature of 30° C is recommended.
•
Never tumble dry in a clothes dryer.
Removing the fabric parts:
•
Release the harness system.
•
Remove the support pillow and harness pads.
•
Pull the harnesses through the fabric.
•
Lift off the fabric.
Attaching the fabric:
•
Stick the harnesses back through the openings in the fabric.
•
Pull the fabric back onto the seat.
•
Pull the pads back onto the harnesses.
•
Insert the support pillow again.
G Seat unit
35
Publicité
Table des Matières
