Sharp XE-A212 Manuel D'instructions page 58

A212_3 FOR THE MANAGER
Various Function Selection Programming 2
3
The cash register provides various options so you can use the register to suit your sales needs.
In this section, you can program the following features (parameters within parentheses indicates default setting):
• Power save mode (entering the power save mode after 30 minutes)
• Logo message print format (Header 6-line message)
• Thermal printer density (standard density)
• Language selection (English)
• EJ memory type (EJ 9000 records and PLU 210 codes)
• Training clerk specification (none) - If you specify a clerk number who is trained for use on this cash register,
the cash register will go into training mode when the clerk is signed on for sales entries. The sales operations
done by the trained clerk do not affect sales totals. For details, refer to TRAINING MODE section.
Power save mode
* Item:
A Entering power save mode
when time is displayed
B-D Time(min.) to entering power save mode
since no operation is made
Logo message print format
You can select the number of lines for your logo message, and the position to print it on receipt.
For details of the logo message type, please refer to "Logo messages" on page 46.
*A: Logo message type
0: Header 3-line message without graphic logo
3: Header 6-line message (default)
5: Header 3-line message and footer 3-line message
56
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:02 AM
s
10
When 999 is set for B to D, entering into power save mode is inhibited.
Key operation example
s @
10
s A
0060
s
11
Key operation example
s @
11
s A
0
Page 56
@ s
*ABCD
Selection:
Yes*
No
To set "0"
@ s
*A
A
Entry:
0
1
001-254 or 999
(Default 030)
Print
A
Print