Sharp XE-A212 Manuel D'instructions page 23

A212_2 FOR THE OPERATOR
Manual tax 1-4 system (Manual entry method using preset percentages)
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the
After this calculation, you must finalize the transaction.
Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The
combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable
2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously
programmed for these taxes.
OPTIONAL FEATURES
1 Auxiliary Entries
Percent calculations (premium or discount)
Your register provides the percent calculation for the subtotal and/or each item entry depending on the
programming.
• Percentage: 0.01 to 100.00% (Depending on the programming)
Percent calculation for subtotal
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:01 AM
s t
• The tax status of PLU/subdepartment depends on the tax status of the department which the
PLU/subdepartment belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the
receipt as follows:
VAT1/tax1
VAT2/tax2
VAT3/tax3
VAT4/tax4
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For programming, please refer to "Various Function
Selection Programming 1" (Job code 66) on page 53.
Application of preset rate (if programmed) and manual rate entry are available.
Key operation example
4
140
10
Page 21
t
key is pressed just after the
A
B
C
D
@
'
™
s
%
A
s
key.
Receipt print
21