Sharp XE-A212 Manuel D'instructions page 17

A212_2 FOR THE OPERATOR
3 Item Entries
Single item entries
1. Department entries
The cash register provides a maximum of 50 departments for a merchandise classification. Group attributes,
such as taxable status, are applied to items when they are entered to the departments.
• When using the department keys (for department 1 to 6)
For department 1 to 6, enter a unit price and press a department key. If you use a programmed unit price,
press a department key only.
When using a programmed unit price
• When using the department code entry key
Enter a department (dept.) code and press the
you use a programmed unit price, enter a dept. code and press the
Dept. code
(1 to 50)
2. PLU/subdepartment entries
For another merchandise classification, the cash register provides a maximum of 1200 PLUs/subdepartments.
PLUs are used to call up preset prices by pressing direct PLU keys or entering PLU codes with a press of the
p
key. Subdepartments are used to classify merchandise into smaller groups under the departments.
Every PLU and subdepartment has a code from 1 to 1200, and should belong to a department to obtain
attributes of that department.
By default, the cash register is preprogrammed to be able to use 1 to 210 codes, and these 210 codes are set to
PLU mode and zero for unit price.
To extend the number of PLU codes to 1200, please refer to "EJ memory type" on page 57, and for other
PLU/subdepartment programming, refer to "PLU and Subdepartment Programming" on page 37.
• PLU entries
Direct PLU key
PLU code
• Subdepartment (open PLU) entries
Unit price *
(max. 8 digits)
PLU code
* Less than the programmed upper limit amounts
When zero is entered, only the sales quantity is added.
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:01 AM
Unit price * Department key
(max. 8 digits)
When using a programmed unit price
d
Unit price *
(max. 8 digits)
(In case only preset price entry is allowed.)
Direct key entry
p
PLU code entry
Direct PLU key
p
Unit price *
(max. 8 digits)
Page 15
* Less than the programmed upper limit amounts
When zero is entered, only the sales quantity is added.
d
key, then enter a unit price and press the
d
d
Direct key entry
p
PLU code entry
d
key.
* Less than the programmed upper limit
amounts
When zero is entered, only the sales
quantity is added.
key again. If
15