Publicité
Les langues disponibles
Les langues disponibles
A212_3 FOR THE MANAGER
For easier programming for the direct PLU keys, the register especially allows you to program all parameters in
one procedure according to guidance messages displayed on the upper line of operator display, while you can
program parameters individually. (For these individual programming methods, please refer to next two sections
and "PLU text (item label)" on page 44.)
Follow the procedure shown below for direct key programming:
1. Specify the direct PLU key and its level.
• Press a level shift key and a direct PLU key in this
order.
Immediately after displaying the current text setting,
guidance message for the next step will be displayed
on the upper line and the corresponding PLU key
code you entered will be displayed on the lower line.
When you press a direct PLU key without pressing a
level shift key, level 1 is automatically selected.
2. Text programming
:
• Press
The text data currently set will be displayed on the
upper line.
• Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" for
entering the item name.
When you start entering a character, the current text
data will be overwritten by new data.
• Press the
Guidance message for the next step will be displayed.
3. Unit price programming
• Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
• Press the
Guidance message for the next step will be displayed.
38
Downloaded from:
http://www.usersmanualguide.com/
03.7.5 8:02 AM
• To keep current setting on each programming, press the
guidance message is firstly displayed.
A
• When pressing the
key in the middle of procedure, the programming will terminate and the
data you entered before the press of
s
(Press
to skip)
key to enter text programming.
s
key to register the item name.
s
(Press
s
key to register the unit price.
Page 38
s
A
is saved.
Key operation
to skip)
key when the corresponding
Operator display
[ ¡
PLU.0071
0071
ENTER[00]KEY
0071
Guidance message
PLU code
:
PLU.0071
0071
Current text data
MELON
MELON
0071
Overwritten by new data
s
PRICE
0071
0.00
PRICE
500
0071
s
ENTER DEPT#
0071
PGM
0.00
0.00
PGM
0.00
PGM
05
500
01
Publicité
