Mobicool S13 DC Manuel D'utilisation page 8

_S13_S32_CAN.book Seite 8 Donnerstag, 25. Oktober 2007 3:04 15
Operation
5.2 Using the soft cooler
Note
I
Like every cooling device, your soft cooler must be properly venti-
lated so that any heat created can dissipate. Otherwise proper
functioning cannot be ensured.
➤ Connect the 12 V connection cable into the cigarette lighter socket or a
12 V socket in the vehicle.
✓ The soft cooler starts cooling the interior.
Caution!
a
Ensure that the objects placed in the soft cooler are suitable for
cooling to the selected temperature.
➤ Disconnect the power cable to switch the device off.
5.3 Folding away the soft cooler
➤ Fold up the bottom towards the handle, then fold the empty soft cooler flat
and fasten it with the snap buttons.
5.4 Connecting to a cigarette lighter
Note
I
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device
with power.
8
S13 DC, MB32 DC