Installation Instructions; Before You Begin - Thermador CHMHP366W Instructions D'installation

Masquer les pouces Voir aussi pour CHMHP366W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions

Before You Begin

State of California Proposition 65 Warning:
WARNING
This product can expose you to chemicals including
vinyl chloride, which is known to the State of California
to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
CAUTION
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being
turned ON accidentally.
Before you begin read these instructions carefully.
Duct Cover Extensions fill the space between the hood
and ceiling of 8' (2.4 m) and 9' (2.7 m) ceilings.
Telescoping extensions accommodate 10' (3 m) ceilings.
Pro Hood Duct Cover Extensions
Model
HPCN36WS
HPCN48WS
PH30HWS
PH36HWS, PH36GWS
PH42GWS
PH48HWS, PH48GWS
PH54GWS
PH60GWS
Pro Hood Telescoping Duct Cover Extensions
Model
HPCN36WS
HPCN36WS
HPCN48WS
HPCN48WS
Page. 4
6'' Extension
CHMHP366W
CHMHP486W
DC306W
DC366W
DC426W
DC486W
Telescoping Extension
CHMHP36TW
CHMHP36XTW
CHMHP48TW
CHMHP48XTW
Duct Cover Extension
Installation
IMPORTANT: Secure the Hood to the wall before
installing the Duct Cover Extension. Follow the Hood's
Installation Instructions before securing the Extension.
The Duct Cover Extension is supported by the hood.
1. Installation of the hood should maintain a minimum
height of 30" (762 mm) from the bottom of the hood
to the cooking surface. To determine placement of the
hood with a Duct Cover Extension, the height of the
Extension must be calculated (see the Hood's
Installation Instructions).
2. From inside of hood, screw the supplied 5/8'' (16 mm)
sheet metal screws through the holes on each side
and along the front into bottom of the Duct Cover
Extension, as shown in below. (Screw quantity is
dependent on hood size.)
1
2

Publicité

Table des Matières
loading

Table des Matières