Parts Supplied; Installation Instructions - Thermador DC306W Manuel D'installation

Parts Supplied

1 - Hardware bag
• 7 - 4.2 x 8 mm installation screws
• 1 - Torx adapter 20

Installation Instructions

On some models, optional duct covers and telescoping
extensions may be used to fill the space between the hood
and ceiling in wall mount installations.
Model
PH30HWS
PH36HWS
PH36GWS
PH42GWS
PH48HWS
PH48GWS
Duct Cover Extension Installation
IMPORTANT NOTE: Secure the Chimney Wall Hood to the
wall before installing the Chimney Extension. See "Moun-
ting the Hood" section on the Hood Installation Manual.
1. Installation of the chimney hood should maintain a
minimum height of 30" (762 mm) from the bottom of
the hood to the cooking surface. To determine
placement of the hood with a Chimney Extension, the
height of the chimney extension must be calculated.
6"
(152)
11"
(280)
Page 4
Duct Cover
DC306W
DC366W
DC426W
DC486W
17"
(432)
2. From inside of hood, screw the supplied 4.2 x 8 mm
sheet metal screws through the holes on each side and
along the front into bottom of the extension, as shown
in below.