Bissell ReadyClean A3 Mode D'emploi page 19

START CLEANING START CLEANING
Your ReadyClean A3 has 3 cleaning mode options: dry mopping, wet mopping or dry + wet mopping. The mode can be selected on top of the docking station
or through the ReadyClean APP by BISSELL. Note: Dry + Wet Mopping mode: the robot will dry mop first, when finished, it will go back and wet mop. If the battery
depletes before the job is completed, the robot will return to the docking station to charge and will resume cleaning where it left off when it is fully charged.
1. Add water and cleaning solution 1. Add water and cleaning solution
A. Remove the water tank by pressing the release
button on the back of the tank and pulling out.
D. Slide the water tank back into the robot.
EN
B. Remove the rubber stopper and fill the water
tank with water. If desired, add a cap full of the
provided cleaning solution to the water tank.
NOTE: Do not fill the water tank with cleaning
solution alone as it will clog the water outlets.
C. Firmly press the rubber stopper back into the
water tank.
19