Bissell ReadyClean A3 Mode D'emploi page 20

START CLEANING START CLEANING
The Auto Change Pad The Auto Change Pad
By default, the robot will automatically change
the cleaning pad after cleaning (20 m
Customize when the pad is changed in the
ReadyClean APP by BISSELL by sq. ft. cleaned
OR by room.
When the robot returns to the docking station,
it will drive into the docking station to drop
the dirty pad. The dirty pad will be lifted into
the used pad container, while a clean pad will
be dropped. The robot will drive back into the
docking station to pick up the clean pad to
finish cleaning or to charge.
20
Empty the Used Cleaning Pads Frequently Empty the Used Cleaning Pads Frequently
Remember to dispose of the dirty cleaning
). pads that are collected in the used container.
2
Lift the lid of the docking station to access the
used pad container. Use the handles to lift the
dirty cleaning pads out of the docking station.
Dispose of the dirty pads (do not throw away
the rubber pad bases).
NOTE: if the used wet pads are not emptied
frequently, mold and mildew could accumulate
in the docking station.
EN