Start Cleaning - Bissell ReadyClean A3 Mode D'emploi

START CLEANING

START CLEANING
Start Cleaning Start Cleaning
After the robot has mapped your floor plan,
it is ready to clean! After recharging from its
mapping journey, select the cleaning mode
" " and press " " on top of
the docking station or through the ReadyClean
APP by BISSELL.
The robot will begin cleaning around the
perimeter of the room before settling into a
methodical back and forth pattern.
NOTE: Download the ReadyClean APP by
BISSELL to actively see where the robot has
already cleaned on your map.
18
Pause Pause
To pause the robot, short press either the "
" " button directly on the robot or through the
ReadyClean APP by BISSELL.
If the robot is paused for more than 10 minutes,
it will enter sleep mode. Short press the "
button to wake up the robot. Short press the "
button a second time to restart the cleaning task.
Return to the Docking Station Return to the Docking Station
" or Return to the docking station
Pause the robot by pressing the "
button. Press the "
robot back to the docking station to charge.
"
" Note: When you manually send your robot home
during mid-cleaning, it will not automatically
change the cleaning pad.
" or " "
" button to send the
EN