Bissell ReadyClean A3 Mode D'emploi page 25

Error Error Possible Cause Possible Cause
Water Tank
The water tank is not installed properly
Error
Insufficient
Water. Please The water level is too low in the water tank
Add Water
Drive Wheel
One or multiple drive wheels is stuck or dirty
Error
1. The docking station is not connected to the power supply
Charging Error
2. The docking station is dirty or blocked
Docking Station
The lifting mechanism of the docking station is stuck
Error
Please add
There are no clean mop pads in the docking station
clean pads
Used Cleaning
The docking station is missing the used cleaning pad storage
Pad Storage
box or it is installed incorrectly
Error
Immobilized
The robot is suspended off the ground or stuck
Error
For additional troubleshooting please visit support.BISSELL.com
EN
TROUBLESHOOTING TROUBLESHOOTING
Solution Solution
Please check the water tank to ensure that it is installed properly
Please refill the water tank and reinstall it into the robot
Inspect the drive wheels for any foreign objects and wipe clean
with a dry cloth
1. Ensure that the Docking Station is properly connected to the
power supply
2. Use a dry cloth to wipe the docking station or remove any foreign
objects blocking the docking station
1. Check for any objects that could be blocking the lifting mechanism
2. Unplug and then reconnect the power cord to reset the docking station
Add more clean mop pads to the clean pad storage box in the docking
station
Install the used mop pad storage box
Place the robot on level ground
25