Malfunctions; Electrical Malfunctions; Mechanical Malfunctions - Auping Royal 300 Mode D'emploi

GB12

5. Malfunctions

While an electrical fault may be a
nuisance, it is never dangerous. All
motors and controls are fitted with
all necessary safety devices and
have double insulation.

5.1 Electrical malfunctions

Check that:
- the plug is in the socket;
- the current is switched on at the
mains power supply;
- the child-safety feature is disabled.
Outside influences such as the
release of static electricity may
affect the memory settings of your
Royal bed. Set your Royal mesh
base in the horizontal position. The
motor setting can now re-find their
starting points, thus restoring the
memory settings.

5.2 Mechanical malfunctions

Undesirable noises (bed squeaks
and creaks)
Unwanted noises are usually caused
by moving parts touching each other.
The reason for this may be a
missing part, or parts that have not
been tightened up properly or have
become loose when the bed was
moved.
Check that:
- the bed is properly horizontal;
- the floor is absolutely level;
- the bed is positioned away from
the wall;
- there are no unwanted objects in
the bed that should not be there
(spoons, forks, pens, etc.).