Remote Control; Technical Specifications - Auping Royal 300 Mode D'emploi

1.2 Remote control

The remote control is used to adjust
the motorised sections of your bed.
To comply with "GS" safety
regulations, the remote control must
always be operated using two hands.
This prevents one hand getting
trapped between moving parts while
adjusting.
To use any of the adjustment or
programming functions, always keep
one of the blue release buttons
pressed down. Use the fingers of
your other hand to operate the up or
down memory buttons.
The remote control has a memory, in
which you can store three pre-set
positions, and a childproof function
with which you can lock the
adjustment functions.

1.3 Technical specifications

Transformer
- Input: 230/240/100/110 V~.
- Output: 24 V, 60 W, 100% ED
The transformer is fitted with an
isolator switch.
This switch connects the mains
voltage to the motor only after one
GB4
150 W, 010% ED
1. Memory buttons
2. Raise head support
3. Lower head support
4. Raise back section
5. Lower back section
6. Raise knee section
7. Lower knee section
8. Raise foot lift
9. Lower foot lift
10. Release buttons
11. Programming and child-lock
button
of the operating buttons on the
remote control has been pushed.
Motors
DC motor 24 V, 65 W. maximum
continuous operating time 2 minutes
per 20 minutes.