WIKA AC-1 Mode D'emploi page 14

3. Specifications
Overvoltage protection
max. DC 36 V
GB
Insulation voltage
DC 500 V
3.8 Materials
Wetted parts
Process connection from brass
■
Sensor from ceramic Al
■
O-ring from CR70 (chloroprene)
■
Non-wetted parts
Case from brass
■
Electrical connection from highly resistant, glass-fibre reinforced plastic PBT GF 30
■
3.9 Approvals, directives and certificates
Approval (option)
cRUus (recognition)
CE conformity
EMC directive 2004/108/EC, EN 61326 emission (group 1, class B) and interference immunity (indus-
trial application)
For special model numbers, e.g. AC-10000, please note the specifications stated on the delivery note.
For further specifications see WIKA data sheet PE 81.46 and the order documentation.
14
O 96 %
2 3
WIKA operating instructions pressure transmitter model AC-1