WIKA AC-1 Mode D'emploi page 18

6. Commissioning, operation
Select a cable diameter that matches the cable gland of the mating connector.
■
Connect the pins of the mating connector in accordance with the connection diagram.
Ensure that all seals are correctly fitted and have not been damaged.
GB
Tighten the cable gland and check that the seal is correctly seated, in order to ensure the ingress
protection.
For cable outlets, make sure that no moisture enters at the cable end.
■
Connection diagrams
Circular connector M12 x 1
U B
0V
S+
Cable outlet
U B
0V
S+
Wire cross-section 3 x 0.14 mm
Cable diameter 3.2 mm
18
2-wire 3-wire
1 1
3 3
- 4
2-wire 3-wire
brown brown
green green
- white
2
WIKA operating instructions pressure transmitter model AC-1
Metri-Pack series 150
2-wire
U B B
0V C
S+ -
3-wire
B
A
C